Originally Posted by mrsilent13  the TCM aka tranny control module....will detect low traction which will send a signal to the pcm which will activate a reduced power mode until it regains traction...
with a switch that can be added very easily...this problem goes away...works well at the track...it turns off the T/C....
by routing a wire to ground...then a switch and then a wire to the ground strap on the e-brake...once you flip the switch the yellow T/C light comes on indicating that your T/C is off....i used an alligator clip to attach to the e-brake grounding strap...so you dont need to hack up the wiring at all...you just add 2 wires and a switch.
this would simulate you clicking the ebrake up without actually applying the ebrake...some of us..keep our rear brakes adjusted...to where one click...is basically heating up the drum too much...and we dont want to see any brake fading do we? |
cool! so its basically a inline switch in ground, good too know!