Chevy Cobalt Forum - Cobalt SS | Cruze | Saturn ION | Pontiac G5 Forum - View Single Post - intermediate (half) shaft bearing remove and replace

**ls1fbody** · 02-14-2010, 07:22 PM

Strut-Knuckle bolts: 89 lb/ft.

Axle Nut: Couldn't find it. (it's a 32mm nut btw)

Transaxle Fill: 37 lb/ft

Transaxle Drain: 37 lb/ft

Transaxle Level: 37 lb/ft

Mike, this is where i get my torque specs from:
http://www.ecotecforum.com/forums/forumdisplay.php?f=95

02-14-2010, 07:22 PM	#7 (permalink)
ls1fbody Senior Member Full Access Member Join Date: Jan 2010 Age: 24 Posts: 263	Strut-Knuckle bolts: 89 lb/ft. Axle Nut: Couldn't find it. (it's a 32mm nut btw) Transaxle Fill: 37 lb/ft Transaxle Drain: 37 lb/ft Transaxle Level: 37 lb/ft Mike, this is where i get my torque specs from: http://www.ecotecforum.com/forums/forumdisplay.php?f=95