cams on 07+

[huckernage]

I m looking for a thread that speak about install a cam sensor on a cam stg X.

is anyone has a stgX cam on L61 07+

[cobalt123]

hang on i thought cobalt tom had a how to up on this

---------- Post added at 04:03 PM ---------- Previous post was at 04:02 PM ----------

How to install Cams (2.2 but works for any)

[dman090]

Originally Posted by cobalt123 hang on i thought cobalt tom had a how to up on this ---------- Post added at 04:03 PM ---------- Previous post was at 04:02 PM ---------- How to install Cams (2.2 but works for any)

nah man one of the cams is too long for the 07+ 2.2's or something like that an d you need a sensor machined in

[FASTL61]

the intake cam has to be cut then the sensor doesnt need to be there,vince can tune out the sensor but you can get it machined on

[huckernage]

vince has tuned one. but i told me that he has cam sensor correlation trouble. he didnt tell me that fastl61. i ll confirm that with him.

[mrsilent13]

what u need to do is purchase some stage x cams that fit for ecotecs....comp cams right..

now you will take your stock intake cam out and take it to a machine shop and tell them to swap the sensor from your stock cam onto your new stage x intake cam....

i had some stage 2 cams for the 07 head...i had the only ones ever made...i sold them about a year ago....dont know who has them now

[huckernage]

mrsilent: is your setup was running fine or you get hard time with it

is it you : this car had a persistent P0016 code (cam/crank sensor correlation)

---------- Post added at 05:44 PM ---------- Previous post was at 05:29 PM ----------

Originally Posted by FASTL61 the intake cam has to be cut then the sensor doesnt need to be there,vince can tune out the sensor but you can get it machined on

TFT dit (17:05) :
i am not totally sure about this
there was one 2007 2.2 we did stage cams on

[mrsilent13]

just get the sensor machined on...and this way you wont have any kind of problem with sensor correlation.

[huckernage]

Originally Posted by mrsilent13 just get the sensor machined on...and this way you wont have any kind of problem with sensor correlation.

same if the sensor is maniched on. i can be off by a hair and send a DTC.

were you runing that sensor on?

[mrsilent13]

yes...the sensor was on...but like i said i sold the cams about a year ago...i had them for sell for about 4 months and they finally sold to White G5 on G5club.net if you like...you can ask him if he still has them or maybe he knows who has them. but these cams were done by bates engineering