s/c 2.2s running meth question...

[cobalt123]

i got the devils own meth kit and im looking at where to tap it

i need the supercharger gasket as well so two bird one stone?
http://www.zzperformance.com/cobalt_...=970&catid=143

or get a throttle body spacer tapped for ?

or tap into the air intake?

[Jn2]

with the blower spacer it depends on what size pulley u will be running, hopefully not the stock one, bc it does raise the blower up, and u will run into issues with the belt not going on...i would just tap it into the intake

[cobalt123]

intake huh thats what you did

[Jn2]

my intake has a meth tap in it but i wrapped the pipe in electric tape since im not running meth...

---------- Post added at 04:00 PM ---------- Previous post was at 03:59 PM ----------



if you look the right of the KNN labels u can see the tape

---------- Post added at 04:01 PM ---------- Previous post was at 04:00 PM ----------

the hole is on the bottom of the intake so you cant see the nozzle when installed

[huckernage]

use this spacer. it made for it according to them.