How To: rear springs

[ls1fbody]

Unfortunately this axle was the reason i had to abandon my coilovers, At full ride height in the rear i was still tucking a quarter inch of tire.

[ff_drift_lol]

and...the problem with that is?

[YelloEye]

Originally Posted by ls1fbody Unfortunately this axle was the reason i had to abandon my coilovers, At full ride height in the rear i was still tucking a quarter inch of tire.

Jeez lol whered the mount point get moved to? And how come the original mount point wasnt preserved?

[ls1fbody]

The springs were binding and with the 19's there was no clearance. I'll probably go back to coilovers in the future for show applications. I didn't mind it being low, but i wanted the ability to go higher if i needed, and i couldn't.

---------- Post added at 05:48 PM ---------- Previous post was at 05:46 PM ----------

Originally Posted by YelloEye Jeez lol whered the mount point get moved to? And how come the original mount point wasnt preserved?

it wasn't removed, just modified. I couldn't tell you to be honest, i looked at both axles sitting next to each other, and they look damn near the same. I would have to get out a measuring tape and start crawling all over that to figure it out haha