B0081 is Passenger Presence System, I'm looking up the diagnostic for 09 in my service books. You guys should invest in a set of books from CED.
---------- Post added at 04:16 PM ---------- Previous post was at 04:12 PM ----------
Originally Posted by Tuner923 I read the code for the SRS with a Tech 2 and it came up as a B0081. also throwing a evap code. |
Was that a B0081 3A or 71?
3A indicates that the system cannot retrieve the expected ID from the PPS module.
71 indicates that the system has recieved invalid serial data from the PPS module indicating a short in either the B+ Voltage Ref, Serial data, or ground.
---------- Post added at 04:21 PM ---------- Previous post was at 04:16 PM ----------
For both of you: Do you still have your original passenger seats and is the little black plate that says pass airbag ON OFF still installed and connected?
---------- Post added at 04:28 PM ---------- Previous post was at 04:21 PM ----------
Intermittent usually indicates a bad connection somewhere, I'd be guessing the wires under the passenger seat myself.
---------- Post added at 04:37 PM ---------- Previous post was at 04:28 PM ----------
And unless you can find a wiring problem you're going to need a Tech2 to figure out what's going on. Tuner it sounds like you have access to one, might want to do a PPS rezero or PPS Setup if it's not a wiring problem.
Check your under seat connector and the connector behind the ON OFF indicator for passenger seat.