i had an issue a few months ago when my car just stalled and the gages when crazy and the tranny shifted hard. coby told me to go and unplug the body computer and make sure the connections are good clean and to put dielectric grease on them. i did it and have had 0 issues since. now the...
some have done that to the corvair. and if you do a search you will see a bunch of cars that had this done. but like stated it is time money and troubleshooting to perfect it. but like so many think if the engine was in the back the car would become unstable. i personally don't think so ans i...
could be coil over springs. and they just may be suspension springs. the smaller ones look like over shocks the larger ones look like suspension or strut springs
no reason rubber would not pass a state inspection. the line is rubber from the tank to the filer and most likely rubber at the engine. they use steel as it is cheaper. rubber will take more abuse than steel. but cost more. and if rubber was cheaper they would fine a was to stick it up inside...
ok update i changed out teh rear 02 sensor and now i will see if anything changes. i did notice the sensor runs more steady now and it is running around .6 to .7 volts if the cat is good this may go down as the cat gets a chance to burn off the junk. but with this time is going to be the factor...
so i just got this and will tell you what i did. i cut the lines up ahead of the rusted area towards the engine along the frame and installed hi pressure gas hose, then i got some tubing and bent it to go around the bend and cut the line about 6" from the filter. and attached some hose there as...
last time i posted on codes i had 3 codes p0030 p0130 p0135 all related to the 02 sensor. so i changed the upstream sensor. today the p0420 came up for cat efficiency. i changed out the front 02 sensor so now it looks like i may have to change out the rear. i'm going to run the car and take a...
ok good luck with the water pump. never did one of those yet. someday maybe. look at the video and this may be the issue your having. if so it is an easy fix. good luck on both issues.
so go to this cobalt link and see if this video helps you out for your issue. let us know if it did
http://www.chevycobaltforum.com/threads/p0446-code.7565/