Recent content by michelsl

I have tried to find the instructions but can't i guess I will have to keep looking thanks for the place to start.

Is there anywhere on the stock block that you can return oil that has no pressure?

Did you cycle through the DIC?

I have searched but can't seem to find the info I am looking for. Where do you guys that are doing turbo builds on the 2.2 return the oil to the engine? I am not doing a turbo build but am putting a bypass oil filter on my car and need a place to return oil from the filter.

I have a 2007 LS and it has the buttons on the wheel that is how I reset my OLM but I only need to do it every other oil change.

So can I unbolt the motor and see if it has play in it or is there something special that needs to be done?

Mine is doing the same thing. Does your rattle seem to be speed sensitive?

I have checked the suspension and the mounts along with the rack and tie rods. It will also make a little noise if you wiggle the wheel with the car shut off and it sounds like its coming from the cabin. With the door shut you can't hear it outside the car.

I know where the motor is and thats the same area the noise comes form.

Ok I didn't mention that it is over bumps at that speed and the tires are not the problem I just got them replaced and a four wheel alignment done. The power steering in our cars is speed sensitive if I was told correctly that’s what makes me think it’s the problem.

I am having an issue with a rattle in the front end of the car and I think it has something to do with the power steering motor. After having it replaced on the recall I picked up a rattle that have got worse to the point that at around 10 to 15 mph it sounds like the steering column is coming...

Not all the 2007 and up have the external filter some have the filter in the tank on the fuel pump.

I went to change the cabin air fitler in my car today and the one i got would not go into the slot behind the glove box. I put the new one on top of the oem on that came out of the car and the new one was about an 1/8" wider. I took it down the road to the building where the engineers for...

Ok one last thing has come up with the car after i replaced the fuse box the lights work right for a couple hours now the stay on every now and then is it possible the BCM has to relearn something with the new fuse box? That is the only thing I can come up with for them not working right all the...

Turns out it wasn't the BCM after all it is a bad fuse box. They said it has a built in relay for the head lights that wasn't working right messing other things up.