Stock high + low beam at same time mod
- Thread starter wehan
- Start date
Tuner923
Full Access Member
heat...
This.
Unless you are running a dual bulb projector housing with HID lows.
I did it on mine, simply accomplished with a couple of diodes and a cap.
Probably end up burning out the bulb.
williamsm834
Junior Member
- Joined
- Apr 20, 2014
- Posts
- 1
- Reaction score
- 0
high and low beams at the same time
i have aftermarket dual bulb headlights. and i was wondering how you were able to configure both your high and low beams to be on at the same time when you turn your high beams on. I would really appreciate your help. thank you!
i have aftermarket dual bulb headlights. and i was wondering how you were able to configure both your high and low beams to be on at the same time when you turn your high beams on. I would really appreciate your help. thank you!
Shot you a PM. Basically you just connect the high and low beam wires with a diode so that power always flows to the low beam regardless of hi/low and the highs are only on in the high position. I used 2 diodes and a small capacitor to accomplish this, the capacitor is to keep the lows from flickering off during the transition from low to high and back. All parts can be picked up at Radioshack or Fry's for like $5, toss it all in some heat shrink and you're set.
Last edited:
If anyone was curious, this is basically the configuration I had from what I recall, it's been a while. 1000uF capacitor and a couple diodes. Worked great.
