New Headunit Wiring problem!!

I have a 2006 Cobalt LT with the pioneer system in it. I wired up a harness for a new H/U that I am putting in. I matched the colors and what not, when I plug the harness into my car the interface chimes and everything works fine. The H/U won't power up at all, I checked every fuse and none were blown. I might be making a noob mistake but I'm not sure what I did wrong. Ps don't rip on me when you see the connections on the harness they are only temporary until I figure out the problem.

I have no idea if you can see any problems with the crap pictures I took

...

....

.....

You need to run your own ACC wire, the one in the harness won't work for aftermarket head units.

YelloEye said:

You need to run your own ACC wire, the one in the harness won't work for aftermarket head units.

Click to expand...

Can I just use the acc wire from my harness and tap it into a fuse?

what harness? You need to attach an acc from the fuse to the pioneer harness. and it needs to not be connected to the red acc in the stock harness