Find your motor here: http://www.crateenginedepot.com/Timing-Chains-Components-C665.aspx If you have the LAP I'm unsure which kit you will need,...
The other possibility is a bad fuel tank pressure sensor. It's on the side of the EVAP canister.
Unless you plan on swapping the ECU and wiring harness there's nothing that's a straight swap with that motor. Nothing is preventing you from...
I think the P0102 is the problem child here. The other two can be caused by the MAF being screwy, it's absolutely what's causing the car to go...
Crate Engine depot has the full kit you'll need. On top of that you need motor oil. How many miles is the motor up to?
I too changed a thermostat on one of the 2.2 motors and found it to be quite easy with that one. Two bolts and then it pulls up and away.
Welcome! Nice Chevy collection ya got there!
Powersteering is a recall, get that checked out if you haven't already. As for traction control you might have a wheel speed sensor or wiring...
If you hook up the old starter to the wires does the starter spin? It sounds like you might not have a cable hooked up all the way.
Engine swap is only viable if you do the entire motor, transmission, wire loom, ECU, etc. Otherwise nothing lines up or works together. Dropping...
Needs a bit of work to make that happen, I believe the knuckles are different, you'll need to get the larger brake rotors, hoses are different....
There's a ton of lights on that switch. Easiest way to diag that is going to be to drive it in the rain and then start pulling things apart and...
Check out places like CrateEngineDepot.com and WholesaleGMParts.com they'll have a replacement. You can also check junkyards. I recall Kentucky...
Unrelated codes. What were the numbers for them?
ZZP has nice exhaust bits.
Moisture in oil lines....that shouldn't make milky oil after a flush. Heck even a standard oil change would get rid of it. Sounds more like you...
I'm not sure.
Physically it'll fit, wiring on the other hand isn't a direct fit.
The usual spots I see are less than 6" from connector ends. When are the misfire events happening? (load, cold start, etc.)
Any chance the ignition loom has damage?
Magnaflow is decent. Really gotta look at what you want. I suggest the largest longest resonator and a decent muffler with packing. Otherwise...
Welcome! Dropping the subframe is great fun /s I dropped the whole drivetrain to replace the motor in my SS last year. Engine hoist and lots of...
Bad connection at the wiper stalk?
The KR sensors are really touchy on these motors, but that shouldn't be the issue unless you're seeing massive knock.
I'm going to say CV joints as well.
Separate names with a comma.
