Search results

  1. hahn><boost

    Ading a turbo charger

    ive got a hahn level V kit for sale
  2. hahn><boost

    Time for a new transmission..

    wheres the power goin to be up high?
  3. hahn><boost

    Time for a new transmission..

    Transmission just showed up yesterday lol, this is going to be a fun car. starting to think this car is indestructable now. Throw my coilovers and sway bars on and I think this thing might be ready for the road course. What do you guys think the install time on this is?
  4. hahn><boost

    supercharger help

    If your looking for one Ive got one for sale with an injen intake and an engine damper for $1500
  5. hahn><boost

    Time for a new transmission..

    well back again and my fire breathing cobalt blew up the transmission well I was shifting into third. I was dyno'd at 343whp but this was in the winter time and....i never turned the boost down. So time for a new tranny! what one lnf 3.82 final gear ratio or the custom 4.05 final gear ratio...
  6. hahn><boost

    Not reaching full boost

    I went and got it TIG welded again. It was split in two spots this time. Seems to be holding up now. I also turned the boost down to 19psi, it was set at 25psi.
  7. hahn><boost

    New O.Z wheels and carbon trunk

    ya I know it looks like a 4*4 now
  8. hahn><boost

    New O.Z wheels and carbon trunk

    I used to do lots of 260km/h passes when I was sc'd and one flew out at one point so I just chucked the other.
  9. hahn><boost

    Not reaching full boost

    Im just thinking its going to be more flexible. thats what seems to be the problem, if the weld broke that fast.
  10. hahn><boost

    Not reaching full boost

    lets see if jb weld works now
  11. hahn><boost

    Not reaching full boost

    The weld is starting to crack again. My warranty is probly toast tho.
  12. hahn><boost

    Not reaching full boost

    Well I got the intake plenum TIG welded and it turned out good. Full boost again!
  13. hahn><boost

    New O.Z wheels and carbon trunk

    Thanks.
  14. hahn><boost

    New O.Z wheels and carbon trunk

    Bc coilovers and sway bars on thier way.
  15. hahn><boost

    Not reaching full boost

    thats what I figured.
  16. hahn><boost

    Not reaching full boost

    I decided Im going to let a welder I work with to TIG weld it. Im wondering if its going to be safe to drive it out to his place? Of course driving slow.
  17. hahn><boost

    Not reaching full boost

    I like that idea of putting that hold on my card. Hopefully they take back the intake with the jb weld I put on it. It took well over 3 months to get the kit over the winter and they should understand that I'm not going to wait like that again.
  18. hahn><boost

    Not reaching full boost

    I hope I dont have to send this one to them before they send me a new one I dont like down time. ---------- Post added at 05:02 PM ---------- Previous post was at 05:00 PM ---------- weld obviously not x-rayed
  19. hahn><boost

    Not reaching full boost

    Well Im tuned to 19.5 psi(130kpa) my boost gauge only goes to 20psi(140kpa) and its burried. so Im not sure whats with that maybe cause its a manual boost controller. So Im really not sure how much boost Im running. ---------- Post added at 04:38 PM ---------- Previous post was at 04:26 PM...
  20. hahn><boost

    Not reaching full boost

    Im just going to jb weld it. lol ---------- Post added at 03:54 PM ---------- Previous post was at 02:05 PM ---------- is there any reason why I shouldnt use jb weld as a temporary fix? I mean will it heat up and some how melt and make its way in to my engine?
  21. hahn><boost

    Not reaching full boost

    well I found whats wrong... cracked my intake plenum. F%%$ ---------- Post added at 09:45 AM ---------- Previous post was at 09:41 AM ---------- I hope I can just get the crack rewelded in town here. I cant wait another 3 months for a new one to get here.
  22. hahn><boost

    Not reaching full boost

    I just went for a drive this morning and I was watching my boost gauge normally the needle is buried at 140kpa and for some reason the most I could get was 130kpa only once other times it was 90kpa. wtf is going on here. There was also a few drops of oil on the front of my intake plenum.
  23. hahn><boost

    345whp on 91 @ 21psi

    haha Nice Just an update cobalt got its second kill tonight. I raced this guy I work with who has a cobb stage 2 at 20 psi with a front mount intercooler sti.... even from a dig he never pull in front of me it was quite hummorus. My first kill was against my friends mazdaspeed3 at 20psi with...
  24. hahn><boost

    345whp on 91 @ 21psi

    do these new pictures get Jamie's seal of approval???
  25. hahn><boost

    345whp on 91 @ 21psi

    http://i1179.photobucket.com/albums/x388/marc435/enginebay1.jpg http://i1179.photobucket.com/albums/x388/marc435/enginebay2.jpg http://i1179.photobucket.com/albums/x388/marc435/enginebay3.jpg http://i1179.photobucket.com/albums/x388/marc435/exhaust.jpg...

Members online

No members online now.

Forum statistics

Threads
7,430
Posts
156,457
Members
4,332
Latest member
Kpcasperson
Top