huckernage
Full Access Member
when upgrading a ion F23 clucth, you need to have no air bubble.
if you are not using vacuum gun, use gravity.
we have to pull the hydro line ¼'' back. it may be hard.
take attention at 1:06 sec, you can see micro air bubbles come out.
[yt]hX_gtDl2-Hc[/yt]
if you are not using vacuum gun, use gravity.
we have to pull the hydro line ¼'' back. it may be hard.
take attention at 1:06 sec, you can see micro air bubbles come out.
[yt]hX_gtDl2-Hc[/yt]
Last edited: