Search results

I thought about using them with the blinker. But the probluem is i don't think there is any way to ahve them on as parking lights and blinker. Because the blinker is just a second circuit in the bulb.

Mine is a nice even light pattern. Do you have Hid's or regular bulbs? ---------- Post added at 05:42 PM ---------- Previous post was at 05:41 PM ---------- Nope keeping my stock 16's. I like the look and it's a decent ride with out being too rough.

Sportlines will look nice. Your be tucked in the front for sure then. rear camber links are a must for Sportlines. Go with the SPC's since they are adjustable. And Koni's of course if you can find them.

Needs dropped on Pro Kit springs to get rid of the wheel gap.

Looks good.

From what i've seen on the other forums. It's play at the power steering gear.

I had the dealer check it when i got the oil changed last week. Anyway. They ordered a new steering column. The rattle is in the column not the Suspension. What's funny is a friend just had his replaced for the exact same noise on his 2010 last week. He's at 10K and i'm at 15K

Push the tab in with a screwdriver and pull-up at the sametime. The one part of the tab will break. Once it does it's easier to get out.

Here is our 2 long hair weenies. They are have same dad. But different mom. ---------- Post added at 11:22 PM ---------- Previous post was at 11:21 PM ---------- Also have a Black short hair.

I like the 2 black weeiner dogs.

Welcome

No whine. But I do have a rattle in the column over small bumps on my 2010. Had the dealer check it out yesterday. They had to order a new steering column. I have 15000 miles on mine. A buddy just had his changed on his 2010 last week for the same noise at 12,000.

Here is a walk through for changing the rings to CCFL. I did mine because I bought my lights used and the rings were out. Appearance How to Swap to CCFL halos in 1st Gen Projectors - Cobalt SS Network Here is a pic of mine since i changed them.

What probluems are you having?

Thanks. I really like them. It makes her look mean.

Added more daytime pics to OP.

15k Only Suspension mods are the Pro Kit springs. Still on FE1 shocks.

I've been noticing a noise that sounds like a rattle coming from the left front when hitting any bumps. I'm wondering is this a bad end link or a bad shock. The ride or handling don't seem to be effected at all. Also as far as i can tell the shock is not leaking at all.

If it's cranking it's not the starter. It's either not getting fuel or spark.

Check to make sure the fuel pump is working.

I got them from Buyhids.com. Also you get them from 194 168 W5W 2825 Map Led Parking Signal Marker Bulbs Oval LEDs

No because the BCM is throwing a relay for the lows in the fuse box under the hood. It would only putting power back to the side of the relay that is not connected when the highs are on.

Yep the same here.

Nope didn't use any diodes and a capacitor. Just the relay to thow power to the lows when the highs are on. They do flash a little when it switches over.

I finally installed my 1st Gen lights. 5K Hid's, Changed Halo's to CCFL, Amber LED's on the top, Also Wired lows to stay on with highs. Highs and lows. Here are some daytime pics. You can see the Halos even with the sun shinning right at the front.