Search results

  1. ff_drift_lol

    hiiiiii

    been awhile.
  2. ff_drift_lol

    ff_drift_lol's COTM Submission

    sorry i'm a little late hope i'm not too late. i'm mike aka drift i love low cars and this is my ongoing art project engine: stock pulley/injectors ngk bkr7e 1 step colder plugs snow performance methanol injection catless 100 octane hp tune ported m62 ported header airbox...
  3. ff_drift_lol

    teh ff_dwift thwed

    friend gives ff_drift megan coilovers from 02 civic si. 12k rate. one got hit. seems like a good idea! i feex so that's done...i am almost done with the second one. i will be retro fitting the top hats (camber caster plates) into the strut towers. they are 3 bolt, but they...
  4. ff_drift_lol

    wanna lower my front more

    my rears are good now especially with all the negative camber the fronts I am stuck! I really don't wanna cut springs again. but it needs to go lower! see? shitty. any ideas?
  5. ff_drift_lol

    cel phone sightings

    post up some nice cars you've spotted and snapped a picture of saw this at cw post smithaven mall doin' it right!
  6. ff_drift_lol

    ff_drift_lol's COTM Submission

    so a lot of new stuff guys i'm still not crazy low, but low enough to compliment the wheels. I am on ground force front springs and "trimmed" rear progress springs. so the story is...hit a curb. positive camber </3 replaced the cradle, struts, control arm, knuckle, hub and prepped my...
  7. ff_drift_lol

    i bwoke it

    wot dew?
  8. ff_drift_lol

    calling all photographers

    halp! went from this did some research and got this: still have no idea wtf i'm doing. any tips? advice? it's a nikon d100 with a 72mm lens
  9. ff_drift_lol

    steelies

    this is like my 3rd thread on steelies, but this time i want to know the availability of steelies for 5x110. i know there are 16's. how wide are they? can I find oem 15's? will they clear my brakes? want slicks.
  10. ff_drift_lol

    wheel spacers

    still can't decide what thickness to get. fenders are rolled, going 2 degrees negative camber in the rear. so should leave about 5mm to move out the wheels more. i was thinking 15mm front 20 rear. am i crazy?
  11. ff_drift_lol

    ff_drift's curb incident thread

    so as most of you know, i smacked into a curb sideways. the impact left me with a bent cradle, rashed wheels, bent strut and idk what else yet. i think my knuckle is trashed. so here's what's new: pearl white (cadillac color) new cradle new ss/tc struts. i'll post pics of the...
  12. ff_drift_lol

    a couple of TSB's for cobalts

    #08-06-05-002B: EI08085 - 2.0L, MIL Lamp On, DTC P0420, Exhaust Noise, Poor Engine Performance (Engineering Information Closed) - (Jun 3, 2009) Subject: EI08085 -- 2.0L, MIL Lamp On, DTC P0420, Exhaust Noise, Poor Engine Performance (Engineering Information Closed) Models: 2005-2007...
  13. ff_drift_lol

    another tsb on fuel additives

    #05-00-89-072B: Fuel and Oil Additives - Facts and Myths/Maximizing Fuel Economy - (Jun 17, 2008) Subject: Fuel and Oil Additives - Facts and Myths/Maximizing Fuel Economy Models: 2009 and Prior GM Passenger Cars and Trucks (including Saturn) 2009 and Prior HUMMER H2, H3...
  14. ff_drift_lol

    need opinions on front stabilizer bar

    got my subframe from an LT. thinner = more oversteer. i hate understeer should i use the lt bar they gave me? or use my lsj bar?
  15. ff_drift_lol

    halp...quick!

    i'm about to order a new subframe for my car cuz i bent mine. anyone know if the fe1 and fe5 stup have the same subframe? i know mounts and suspension are backwards compatible so i am assuming it is, but its a different part number i just need to make sure. 175 vs 500 dollar part here any...
  16. ff_drift_lol

    need advice with carbon fiber wrapping

    i know some of you are into wrapping interior trim with carbon fiber. i can go to the body shop supply down the road and get fiber glass sheets with no resin in that blueish black color for dirt cheap. basically i need advice for wrapping my custom canards and future diffuser and front splitter...
  17. ff_drift_lol

    ff_drift_lol's COTM Submission

    here it is again. i'm ff_drift and i love rice. she's got some scratches and zip ties here and there, but that's all part of the theme. here's some new pics. no high quality just yet. here's some old pics when it was lower now for the mods engine: airbox...
  18. ff_drift_lol

    simoniz glass coat

    dealer only. i'm actually committing a crime using it on customer cars. discuss.
  19. ff_drift_lol

    stiffening my front end

    i have ground force fronts and some ahem...modified progress rears. (done legit this time). i trashed the coilover rear thing cause one of the struts bent. the progress rears are great since the spring's rate is higher than normal, but my ground force fronts are mooshy and me no likey. i am...
  20. ff_drift_lol

    a few new pictures

    just chillin at work. enjoy!
  21. ff_drift_lol

    ff_drift's spectacular retro fitted rear coilovers!!!!

    yes, I am 100% serious. I had a rear lying around from a jaguar xj12 from 1979. i did some simple math, considering the car weighed close to 3 tons and mine a ton and a half, 2 of 4 of these coils will work just great! they have less than 3000 miles on them. they fit like a glove, no...
  22. ff_drift_lol

    redline brian's saabaru

    some of you may remember redlinebrian from css.net. he sold me the cobalt i own now. he's been working on a saabaru lately. originally he had rota torques (work emotion knockoffs) in matte black 17x9 215/35 but now he's rolling with the big boys on bbs rs's 17x9.5. perfect fitment! way...
  23. ff_drift_lol

    any meets in delaware this weekend?

    going down for a few days. today and tomorrow. i'll be around the university of delaware in st newark.
  24. ff_drift_lol

    custom steelies

    I am in love with these wheels. that with a stretched tire and serious negative camber i'm talking a 215 on a 18x10 wheel. throw ideas at me peoples. these are also perfect for those of you that want to clear your brembos with steelies/slicks.
  25. ff_drift_lol

    door latch getting stuck?

    I have been having this problem lately. here's the solution. (rke fob is your clicker for keyless entry) #PIC5190: Diagnosing Driver Door Latch / Lock Inoperative Or Binding - (Jun 11, 2009) Subject: Diagnosing Driver Door Latch/Lock Inoperative or Binding Models: 2009 Chevrolet...

Members online

Total: 298 (members: 1, guests: 297)

Forum statistics

Threads
7,432
Posts
156,460
Members
4,338
Latest member
LokiPMustDie

Latest posts

Top