garrett manifold

[BlackCobalt707]

does anyone have a garrett turbo manifold for sale? let me know. thanks

 

[ff_drift_lol]

garrett makes turbo headers for ecotecs?

 

[mrsilent13]

i seen it on ebay a few times...i actually just saw one on ebay this morning...ill try and get you the link

---------- Post added at 01:25 AM ---------- Previous post was at 01:23 AM ----------

http://cgi.ebay.com/ebaymotors/GARR...rQ5fTruckQ5fPartsQ5fAccessories#ht_1967wt_939

 

[BlackCobalt707]

i found that one a while ago. i found one for $300 brand new

---------- Post added at 05:53 PM ---------- Previous post was at 05:52 PM ----------

garrett makes turbo headers for ecotecs?

yes, they had a kit for the 2.2s and 2.4s but they are discontinued

 

[06ion2coup]

might wanna be careful incase they are made to fit the Cavi heads.... just saying

 

[BlackCobalt707]

naw, they are for the cobalt. and the cavys have the same head as cobalts. i got a cavy head on my car now

 

[USMCFieldMP]

Have you looked at the Vulcan Log Manifold? It would work for you... and it isn't cast either.

www.VulcanTurbo.com

Either way, make sure that you DEI Exhaust Wrap the manifold... it'll put more heat into the Turbo which will help with spool, and it'll keep some heat out of the engine bay, which will help quite a few things.

 

[BlackCobalt707]

i got some heat wrap sittin in my garage waitin to go on the turbo and manifold. i did check vulcan, and i checked the RD Fabs folks you was talkin about but they was all way outta my price range, but i figure garrett should suit me fine. how effective is that heat sprayin stuff? i wanted to spray that and use heat wrap as well

 

[USMCFieldMP]

I don't know about the spray.

 

[BlackCobalt707]

aight

 

[mrsilent13]

i would rather the spray than the heat wrap...heat wrap holds moisture in and parts rust alot faster

 

[BlackCobalt707]

wat spray would you recommend?

 

[mrsilent13]

i went to this shop where they do powder coating and they offered it there...hold on...let me see if i can remember whats its called

---------- Post added at 09:56 PM ---------- Previous post was at 09:52 PM ----------

just a quick read of what im talking about
http://www.e-techpowdercoating.com/hot_powder_coating_applications.htm

http://ultrapowdercoat.com/_wsn/page4.html

 

[BlackCobalt707]

i need to find a place around here that does powder coating

 

[mrsilent13]

just google a shop near you...type in powder coating and then your zip code...should be able to find something not too far

---------- Post added at 11:00 AM ---------- Previous post was at 11:00 AM ----------

or you could ship it to a shop and have them ship it back to you

 

[BlackCobalt707]

im too impatient for that. id prolly end up sending it off for powder coating after the season is over. its been down for too long already

 

[mrsilent13]

i feel you on being down for too long....i barely got the courage to drive my balt today after it being down for 6 months....it started to smoke blue...but it looks like its just residual oil in the exhaust from when my turbo blew up....if my car was really burning that much oil i think it would be empty and not reading full on the dipstick after i ran it for about 70 miles today

---------- Post added at 01:07 AM ---------- Previous post was at 01:06 AM ----------

now i just need a new turbo...