need opinions on front stabilizer bar

[ff_drift_lol]

got my subframe from an LT.
thinner = more oversteer.
i hate understeer
should i use the lt bar they gave me?
or use my lsj bar?

 

[ls1fbody]

Keep your LSJ bar. did you find out if the cradles are the same?

Grab a rear sway, would help you eliminate some of the understeer.

 

[cobalt123]

im using ttr rear sway and ss/tc front bar

 

[ff_drift_lol]

thanks guys.i'll use the lsj bar. yes the cradle is identical

 

[cobalt123]

i think the lsj is only a 1mm difference b/n the lnf

 

[ff_drift_lol]

im fucking pissed. the cradle they sent me...is bent. off by 2 whole cm.
i'm in a shit mess right now

 

[ls1fbody]

can you bend it back?

 

[ff_drift_lol]

no...i tried taking a lump hammer to the old one and getting it back....it should be ok now it measures straight. i think i have a bent strut too. the hub i got for 175
but everything else is just gonna suck dick. i hate everything right now.

 

[cobalt123]

that sucks, now go find the people who sold it to ya and bend them 2mm

 

[ff_drift_lol]

my control arm bushings are kinda shot...and my end link broke...AGAIN.

---------- Post added at 07:07 PM ---------- Previous post was at 07:06 PM ----------

that sucks, now go find the people who sold it to ya and bend them 2mm

i'll be sure to give them a piece of my mind first thing tomorrow

 

[cobalt123]

get moog endlinks, wont break your pocket book and pretty strong...

 

[ff_drift_lol]

i do like moog theyve never failed me

 

[cobalt123]

im thinking about just getting some of them even though the ss/tc endlinks are perfectly good

 

[ls1fbody]

Powergrid

 

[ff_drift_lol]

link?

 

[ls1fbody]

Powergrid Sway Bar End Links - Over The Top Performance

 

[cobalt123]

holy shit 160 bucks

 

[ls1fbody]

Holy shit they're worth it. IMO, especially since mike has a tweaked subframe, there may be a pre-load introduced into his suspension now. With these he can dial it out.

 

[cobalt123]

better not break

 

[ff_drift_lol]

im certainly not using a tweaked frame. i have another one coming tomorrow. i ordered moog for now.

---------- Post added at 05:39 PM ---------- Previous post was at 05:35 PM ----------

justdid control arm bushings for a friend they were brand new fe5 arms he gave me the un used bushings for putting his sphericals in. since mine are shot this worked out perfectly! stoked. got my UNBENT cradle coming tomorrow. should be much better. i think the strut is bent. so doing both front struts plus the hub is all i have left really. the control arms measured straight. tire is leaking though