Search results

  1. 1

    P0452 Evaporative Emission System Pressure Sensor/Switch Low

    appears the cause of the P0452 code was a corroded wire; hard to find as it was taped & inside a wire loom.
  2. 1

    P0452 Evaporative Emission System Pressure Sensor/Switch Low

    I have been dealing with a trouble code P0449 on my 2010 Cobalt XFE, which was resolved by repairing a bad splice, during the process of dealing with said code, another code P0452 has come up. the P.I.T.A. P0449 is gone, now P0452 has taken it's place. I have replaced the following parts in...
  3. 1

    jumping out of reverse

    I finally had a dry day here in the mid-atlantic to attempt a fluid change. the drain plug was a challenge to remove due to it's proximity to the frame; I ended up cutting the end off of a Harbor Freight 8MM allen-key & turning it with an 8MM wrench... the fluid was very dark, surprisingly no...
  4. 1

    jumping out of reverse

    again, YelloEye I appreciate your correspondence in helping me contend with this issue. I checked the shifter cable bracket as you recommended, it is firmly attached to the transmission, & the cable ends appear to be secure. I also checked under the cupholder, the cable & ends appear to be...
  5. 1

    jumping out of reverse

    thank you for the prompt reply YelloEye. the reverse issue has occurred for roughly 2 weeks, if I physically hold the shifter in the reverse position it will stay in gear. I also noticed that gears 1 through 5 sometimes require a little more effort to engage during upshifts. there are no...
  6. 1

    jumping out of reverse

    I have a 2010 Cobalt XFE with a 5 speed manual that jumps out of reverse. if I start the car (clutch disengaged) with the shifter is in the reverse position it will stay in reverse, otherwise it will jump out if I go from neutral to reverse. I have a suspicion the clutch is not disengaging all...

Members online

Forum statistics

Threads
7,432
Posts
156,463
Members
4,340
Latest member
buttonsup
Top