wanna lower my front more

[ff_drift_lol]

i'd hate to buy new springs just to chop them. i'll look around for some used ones.

 

[dman090]

i haz used sportlines

 

[ff_drift_lol]

hao much

 

[06ion2coup]

ya... dont cut your springs.... and get coilovers

 

[dman090]

hao much

ill let them gor for 150 shipped

 

[ls1fbody]

Mike i'm having a pair of TC struts modified to bring my front end dow as well.

I'm sitting 1/2 inch higher in the front that the rear, and i'm too cheap for coilovers.

Having the strut/knuckle holes opened up vertically with height marks on them, also moving the endlink mounting tab up. Let you know how it goes.

 

[sundevil07]

how did you bring the back down drift?

im tired of rollin around with 100+ lbs. of shit in the back because of wheelgap

 

[ff_drift_lol]

Mike i'm having a pair of TC struts modified to bring my front end dow as well.

I'm sitting 1/2 inch higher in the front that the rear, and i'm too cheap for coilovers.

Having the strut/knuckle holes opened up vertically with height marks on them, also moving the endlink mounting tab up. Let you know how it goes.

i tried that, my s/c struts have that done but i did it too much now the tire hits the spring perch. i guess a half inch would work. gonna be reeeeal close though.

---------- Post added at 06:26 PM ---------- Previous post was at 06:26 PM ----------

how did you bring the back down drift?

im tired of rollin around with 100+ lbs. of shit in the back because of wheelgap

there were a few dead coils that bound up on my progress rear springs. cut 3 of em off, no ride difference but lower.

---------- Post added at 06:27 PM ---------- Previous post was at 06:26 PM ----------

ya... dont cut your springs.... and get coilovers

ya.... gimme a grand... and get over it

 

[ls1fbody]

yeah, i'm only going half an inch. Good point on the spring perch contacting the tire...

 

[ff_drift_lol]

yeah def. been there haha