Cobalt Tom
Platinum Member
pretty much!!!
thats where the dealer comes in, same part, not too much wait, and no shipping
thats where the dealer comes in, same part, not too much wait, and no shipping
front sway
- Thread starter Cobalt Tom
- Start date
Jn2
Full Access Member
- Joined
- Jul 19, 2009
- Posts
- 1,847
- Reaction score
- 1
so how u planning on installing the sway bar? only pics i have seen they had to drop the entire cradle...**** doing that at home
Cobalt Tom
Platinum Member
ive done it to a freinds sc before, we dropped full front everything besides the engine itself to swap a clutch...in the driveway lol
and yes
i have a hoist for support of the engine, jsut unbolt and drop far enough to swap
and yes
i have a hoist for support of the engine, jsut unbolt and drop far enough to swap
Jn2
Full Access Member
- Joined
- Jul 19, 2009
- Posts
- 1,847
- Reaction score
- 1
ic...too much work for me to try im waaaay to lazy....
im waaaay to lazy....
Cobalt Tom
Platinum Member
i have a hoist, air tools, and enough craftsman bought shit that i should or i have waisted a bunch hahaic...too much work for me to try
07SSYellow
Full Access Member
boo for my car being tempermental...
Tom I found a 3 inch extension in my tool box the other day....I think its yours lol
Cobalt Tom
Platinum Member
free gift for you hahahaha
got it all installed, had to modify existing bushings cause the ss/sc are the same as ss/tc and couldnt use any of the brackets...but its AMAZING now!!!! LOVE IT!!!!
got it all installed, had to modify existing bushings cause the ss/sc are the same as ss/tc and couldnt use any of the brackets...but its AMAZING now!!!! LOVE IT!!!!
07SSYellow
Full Access Member
nice bro glad you got it done sorry i couldnt help!
Cobalt Tom
Platinum Member
its all good
Cobalt Tom
Platinum Member
this didnt work btw, bought the stock ss/sc bushings and tried to use my stock clamps...and the ss/sc bushings and ss/tc bushings looked identical...
diff part number..same part...
so i ended up modifying the stock ones i got with it...tried to modify the ss/tc bracket to work with our setup, but didnt want to drill, so i ground the outside of the bushing till it met the ls bushing outside dimensions...that works well
Jn2
Full Access Member
- Joined
- Jul 19, 2009
- Posts
- 1,847
- Reaction score
- 1
any pics before and after, love adding pics to my collection already have one from a LSJ to eibach swap...eibach is huge
already have one from a LSJ to eibach swap...eibach is huge
Cobalt Tom
Platinum Member
will upload today or tomorrow, they are at home, i have pics of the bars and links side by sideany pics before and after, love adding pics to my collection
oh, and it also let my car sit a little bit lower
my front tire is dead even with the fender
and i have about 1/2 a finger in the back
Jn2
Full Access Member
- Joined
- Jul 19, 2009
- Posts
- 1,847
- Reaction score
- 1
from changing a sway bar? WTF
Cobalt Tom
Platinum Member
aparently hahahaha
the ends of the sway bars are shaped diff, onlything i can think of is that it was pushing or pulling or something
Cobalt Tom
Platinum Member
ok..so for pics of sway bar comparison
see how different these sit???
shorter/ fatter one is ss/tc
everything old and new laid out
see how different these sit???
shorter/ fatter one is ss/tc
everything old and new laid out
Jn2
Full Access Member
- Joined
- Jul 19, 2009
- Posts
- 1,847
- Reaction score
- 1
Ooooooo ic
Cobalt Tom
Platinum Member
i love pic #2
by the numbers...the ss/tc sway bar has 2.25x the meat as the stock ls sway
by the numbers...the ss/tc sway bar has 2.25x the meat as the stock ls sway
U can haz host on CCF? 
Cobalt Tom
Platinum Member
ill do that later today for yaU can haz host on CCF?
and ill do that from now on haahah, i keep forgetting the us gov has broken your internet for you 