hid

[huckernage]

is someone can help me

i have a hid kit. its a bixenon. but my high beam is always light on. i can not flash my light.

 

[bryson87]

i dont know much about hid's but sounds almost like the wireing is wrong? or it could be a single balist(only high beam not both)

 

[outtamymind]

sounds like wiring to me. did you install the relay and resistor for the highs?

 

[REDLINE]

its not real good to flash hids and how did those things get rusted like that???

 

[bryson87]

whole engine looks kinda rusted

 

[Fluffy]

sounds like theres a wire backwards

 

[huckernage]

its not real good to flash hids and how did those things get rusted like that???

they put salt on road during winter in Quebec.

---------- Post added at 08:48 AM ---------- Previous post was at 08:45 AM ----------

sounds like wiring to me. did you install the relay and resistor for the highs?

i ve used everything that was included in this kit

 

[outtamymind]

what happens when you go to flip on your high's. do all the lights turn off? if they do from my understanding its a single filement bulb.

 

[CobaltCpe]

what happens when you go to flip on your high's. do all the lights turn off? if they do from my understanding its a single filement bulb.

yup thats exactly what my hid kit does. When i flip on my highs it turns my lights off so they failed me for inspection here in texas saying we cant pass you because your brights wont work.

 

[bryson87]

then put the stockers back in till then. they make a balist that is single and dual. single is either high or low beam only. the dual is both high and low

 

[huckernage]

what happens when you go to flip on your high's. do all the lights turn off? if they do from my understanding its a single filement bulb.

nop all the lights stay on

 

[outtamymind]

cobaltcpe yours is a single filement kit then and you do not have highs. huckernage i'm not sure on yours but i will keep thinking. other then going back over everything and making double checking you got everything connected properly.

 

[huckernage]

those are PNP
a cavemen can do it lol

 

[outtamymind]

the new ones yes are full 100% plug in play. mind weren't i had to route a bunch of wiring and shit.

 

[YelloEye]

When I did mine there was a wire sticking off the high beam side that you hook up your halogen highs to, its a single beam system. huck, it sounds like something in your wiring is hooked up wrong, or you have a single filament system. Leaning towards single cause that bulb looks exactly the same as mine.

---------- Post added at 11:27 PM ---------- Previous post was at 11:26 PM ----------

Quick Q, how many wires are going into the back of your HID bulb? That'll tell you if its a single or dual. 2 wires=single 3=dual

 

[huckernage]

When I did mine there was a wire sticking off the high beam side that you hook up your halogen highs to, its a single beam system. huck, it sounds like something in your wiring is hooked up wrong, or you have a single filament system. Leaning towards single cause that bulb looks exactly the same as mine.

Quick Q, how many wires are going into the back of your HID bulb? That'll tell you if its a single or dual. 2 wires=single 3=dual

i have one bulb doing high and low.

from the bulbs, there is one to plug with the ballast and the other 2 on that:

you can see the picture of a bixenon bulbs. same of mine:
http://cgi.ebay.ca/2-HID-BiXenon-Bu...r_Truck_Parts_Accessories?hash=item45f06f6a4c

 

[Cobalt08ls]

hmmmmmmmm

 

[huckernage]

i have one bulb doing high and low.

from the bulbs, there is one to plug with the ballast and the other 2 on that:

you can see the picture of a bixenon bulbs. same of mine:
http://cgi.ebay.ca/2-HID-BiXenon-Bu...r_Truck_Parts_Accessories?hash=item45f06f6a4c

it fixed

the blue plug, two wire has to be swicth. blue and white

 

[YelloEye]

You got it? Sweetness!

 

[ionit3]

alot of times the 9004 and 9007 kits when shipped are mixed up u have to switch two wires and it fixes the issue