M-Dub
Full Access Member
Who is this OURS and We stuff.... aren't you the ONLY one!
TTR Rear Sway Bar....
- Thread starter M-Dub
- Start date
- Status
Who is this OURS and We stuff.... aren't you the ONLY one!
TurboTechRacing
Vendor
- Joined
- Aug 5, 2009
- Posts
- 231
- Reaction score
- 0
Really? Last time I checked there was 5 of us here... I am in sales and run forums... I dont do it all.
Ed - Production/welder
Kelcey - Accounting
Aaron - Sales
Eric Production/cnc
Tom - Shipping
There is reason in this statement...personally, I feel further investigation into the reason this particular bar bent.
TurboTechRacing
Vendor
- Joined
- Aug 5, 2009
- Posts
- 231
- Reaction score
- 0
We would love to! But guess what, the OP is running around posting this everywhere, but WONT contact us, so we can get this bar back, verify it is EVEN OURS, and find out what happened.
We use the same material as Progress, but theirs is smaller, which makes are sway bars stronger yet, It is doubtfull this is all the truth here.
Lets get the sway bar back here and we can help him out.
We have sold 100's and this is the first time something this bad. Also look at the paint, that really makes us wonder!
You mean lack thereof right?
Really though guys, how many miles are on this thing? Is it even TTR? This is the interwebz, not everyone has the same agenda.
TurboTechRacing
Vendor
- Joined
- Aug 5, 2009
- Posts
- 231
- Reaction score
- 0
You mean lack thereof right?
Really though guys, how many miles are on this thing? Is it even TTR? This is the interwebz, not everyone has the same agenda.
Look at the first picture, the sway bar is fixed at one end and it hangs down a bit, NOT 4".
But then on a so called "flat" table it is 4" common sense here... The one on the car should hang more than 4" if it is bent, becuase of the weight of the bar deflects!
He wont contact us? Why? We get it back and find out it is not ours, was not properly shown? Etc... Makes you wonder why he wont contact us.
This thread should not be open if he wont contact us and send it back...
I must disagree with you on this, freedom of speech.
I will not become like the CSS mods and ban people or close/delete threads simply because they insulted a vendor, I'll give up my Mod status on morals alone before I do that.
TurboTechRacing
Vendor
- Joined
- Aug 5, 2009
- Posts
- 231
- Reaction score
- 0
How does anyone even know this is ours, or if those pictures are real? The OP wont talk to us, has yet to try, we would love to get it back for verification.
If within a week the original OP has not attempted to talk to you guys I see no reason not to delete this thread.
TurboTechRacing
Vendor
- Joined
- Aug 5, 2009
- Posts
- 231
- Reaction score
- 0
Not delete, in the mean time, "lock" We are fine with this.
In the mean time, he could have stated it was progress and everyone would have believed him.
This is true and I agree, this thread should be locked as it has run amuck on serverissues.net Thus I am locking it.
If anyone has an issue with this please PM myself or another mod/admin, the issue will be discussed amongst the staff here at CCF.
In the mean time Aaron, please be aggressive in your investigation as it should be your perogative to clear TTR's name of this accusation.
To the community, please do not sprout other threads on this subject, give TTR the benefit of the doubt in this matter.
Cobalt Tom
Platinum Member
I agree with this for now, if someone has PROOF that it is a TTR bar, or if there are other verifiable cases of this then please pm site staff AFTER TALKING WITH AARON AT TTR. This way we can keep everyone in the loop
Cobalt Tom
Platinum Member
posted on behalf of TTR
It was just PROVEN it is NOT the bar, it is the end welded plates.
They either were welded on wrong the first place, or are cold and are not right. More and more we think about it, looks like they maybe welded on wrong in the first place as normally a cold welld will crack.
We asked the OP to return the item, and he can have a credit or a new revised unit. We need to find if the plates are bent. If the tabs were welded on wrong in the first place, there is no need for a revised bar, as they are fine.
If anyone else has/finds an issue with your TTR sway bar, please let us know, we will resolve it for you.
It was just PROVEN it is NOT the bar, it is the end welded plates.
They either were welded on wrong the first place, or are cold and are not right. More and more we think about it, looks like they maybe welded on wrong in the first place as normally a cold welld will crack.
We asked the OP to return the item, and he can have a credit or a new revised unit. We need to find if the plates are bent. If the tabs were welded on wrong in the first place, there is no need for a revised bar, as they are fine.
If anyone else has/finds an issue with your TTR sway bar, please let us know, we will resolve it for you.
- Status