07 into 09 motor swap

dahma

Junior Member
Joined
Dec 9, 2014
Posts
11
Reaction score
0
Not sure but I have power to everything just when i crank there is no power to the injectors and to the starter solenoid
 

dahma

Junior Member
Joined
Dec 9, 2014
Posts
11
Reaction score
0
I know maybe the wiring going to the bcm is slightly different but has the same fuses in the same location with same voltages
 

YelloEye

Super Moderator
Staff member
Joined
Jul 18, 2009
Posts
7,601
Reaction score
23
Location
Renton, WA
If a wrong wire is connected to the wrong spot on the BCM it might not work at best, worst it could fry the BCM.

Check your pinouts and make sure the correct wires are hooked up.

---------- Post added at 01:25 PM ---------- Previous post was at 01:23 PM ----------

So we know it won't crank. What does work?
 

dahma

Junior Member
Joined
Dec 9, 2014
Posts
11
Reaction score
0
Everything works everything has power going to it but just no injector pulse no power to starter solenoid when the key is turned to the start position
 

YelloEye

Super Moderator
Staff member
Joined
Jul 18, 2009
Posts
7,601
Reaction score
23
Location
Renton, WA
That code is a short to voltage or open. I'll have to pull the diag procedure at home from the service books. It's related to the ignition switch, I'm hoping a year mismatch between the BCM and ECU isn't going to be a problem.
 

YelloEye

Super Moderator
Staff member
Joined
Jul 18, 2009
Posts
7,601
Reaction score
23
Location
Renton, WA
You might look into picking up a set of the service books or the GM CD, super helpful for this stuff.
 

Members online

Forum statistics

Threads
7,432
Posts
156,465
Members
4,340
Latest member
buttonsup
Top