Cobalt cruise control

726.0chevelle

Junior Member
Joined
Dec 8, 2010
Posts
11
Reaction score
0
When I bought my cobalt I didnt think i would care if it had cruise control. Now after a few years later it drives me crazy. It cant be that hard to put cruise on one its not like chevy would have changed the whole harness for the cars with cc. would it be as simple as changing the steering wheel and plugging in a few connections? Any help would be appreciated.
 

cobalt123

Platinum Member
Joined
Jul 18, 2009
Posts
14,155
Reaction score
4
Location
Tyler Texas
im not an electronics guy but the CC is attacked to a either the bcm or pcm you might need the whole harness, steering wheel/column as you need the buttons, the computer module to tell the car what to do...
 

726.0chevelle

Junior Member
Joined
Dec 8, 2010
Posts
11
Reaction score
0
I seen one at a local salvage yard today that sells stuff for really cheap so kinda got me thinking about trying to do the swap
 

Cobalt Tom

Platinum Member
Joined
Jul 18, 2009
Posts
2,876
Reaction score
0
Location
Auburn, WA
maven has done this, unfort he doesnt freq this site...but it cost him quite a bit and he is a tech and has access to tools you have to have to do the job

that being said there are after market systems you can use
 

726.0chevelle

Junior Member
Joined
Dec 8, 2010
Posts
11
Reaction score
0
What kind of aftermarket kits? I am a lil about the computers on late model Ls engine hense the screen name and a lot of guys were adding cc on the drive by wire throttle body cars without a whole lot of work. The cobalts are dbw so i didnt think it would be that much to it
 

Cobalt Tom

Platinum Member
Joined
Jul 18, 2009
Posts
2,876
Reaction score
0
Location
Auburn, WA
im not sure of what is avail, i just have seen some with aftermarket setups on there
 

726.0chevelle

Junior Member
Joined
Dec 8, 2010
Posts
11
Reaction score
0
i have a plan im getting a cruise control panel out of another cobalt and the short wiring harness then plug that into my cobalt and bring it to a local mechanics shop to have them activate the cc in the bcm. The shop told me they would program it from 50 to 75 and I can get the panel that goes on the steering wheel for 10 to 15 bucks. I also heard we can get the panel off the right side of the steering wheel to control the radio and that just has to be plugged in and it should work instantly. Now I do not know if this will work but from what i have read its the right way to go about it.
 

lukkys

Junior Member
Joined
Aug 14, 2010
Posts
23
Reaction score
0
cobalt cc

Did you read my posting on page 4 2010 ls cruise control.I got one put in.

---------- Post added at 09:54 PM ---------- Previous post was at 09:53 PM ----------

Sorry page 5
 

726.0chevelle

Junior Member
Joined
Dec 8, 2010
Posts
11
Reaction score
0
Yea i seen that its so hard to find good info I called 2 different dealerships and got 2 completely different answers one says the bcm needs to be changed and one says they can just program it. I called a local performance shop and they knew more than the dealerships. Lukkys how much did it cost for your cc.
 

726.0chevelle

Junior Member
Joined
Dec 8, 2010
Posts
11
Reaction score
0
yea one wanted 115 the other dealership wanted 90 to reflash the bcm and Futral motorsports wanted 50 to 75
 

lukkys

Junior Member
Joined
Aug 14, 2010
Posts
23
Reaction score
0
cobalt cc

Mine cost me 600$ big ones but icould have bought it for 279$ and put in myself.There don't seem to be much to install on a 2010,no dealer programming.But all other years need programming but the kit cost 179$ at www.thecruisecontrolstore.com.I hope this help
 

phillcv

Junior Member
Joined
Jul 6, 2011
Posts
1
Reaction score
0
installed all wiring and buttons for factory cruise and took it to dealer--they charged me 105.00 and told me my bcm could not be reprogramed for cruise
 

Members online

No members online now.

Forum statistics

Threads
7,260
Posts
143,452
Members
4,439
Latest member
mdux1982
Top