GT2860rs turbo 2.2L :D(Vidz on 1st post!)

[huckernage]

wow

 

[FASTL61]

wow?
and Im not sure

 

[elecblue06]

15? thats it??

---------- Post added at 08:29 PM ---------- Previous post was at 08:28 PM ----------

does it matter what psi on using wat turbo? or does it not matter?

the 2.4 manifold can hold 20 psi

 

[Zdeuce4]

wut do u mean maf issues.. lemme know cuz i had some issues at first as well.

 

[BlackCobalt707]

the 2.4 manifold can hold 20 psi

alright. good to know. i dont plan on going past 20 anyways

 

[FASTL61]

wut do u mean maf issues.. lemme know cuz i had some issues at first as well.

Vince just said there was turbulence at the MAF and it was acting weird.it keeps popping a MAF low frequency code, rich and lean codes.Dont know what it would be other than a faulty MAF

 

[CobaltKatsu]

omfg, **** the coilovers, im saving for the turbo! i was gonna get the zzp kit. should i get stage 1 or 2? only difference is bov, intercooler, and heat exchanger. and i was gonna get 60's

 

[FASTL61]

stage 1 or 2 what?the garrett kit is what it is

 

[CobaltKatsu]

i was talking about the zzp turbo kit for the 2.2. or can you send me a link to the garrett kit?

 

[elecblue06]

alright. good to know. i dont plan on going past 20 anyways

the guy i bought my procharger kit off of made the 2.4 mani work on his 2.0 and he was pushing 22 psi at the end

 

[FASTL61]

http://www.turbosystem.com/ProjectVehicles/New_Folder/Cobalt/Cobalt 22L Page.htm
this is it.he got his used with 100 miles on it but you can find them on ebay too
or here
http://cgi.ebay.com/ebaymotors/Chev...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[BlackCobalt707]

do you have a bend near 4 inches of either side of the MAF? vince told me i had turbulence and that was why.

 

[FASTL61]

looks good in the pic.
click the ebay link and check it out I dunno?

 

[BlackCobalt707]

pics are too small to tell. but it looks like it has about 4 inches on either side

 

[CobaltKatsu]

sighh, i wish i had the money for it , whats the difference between the zzp turbo kit and this one?

 

[FASTL61]

brand and turbo size

 

[CobaltKatsu]

garrett = bigger turbo?

 

[FASTL61]

link me to ZZP and I think ZZp is bigger

 

[CobaltKatsu]

https://www.zzperformance.com/cobalt_ion/products1.php?id=922&catid=143 i was gonna go with stage 2

 

[06ion2coup]

Could you give specifics on the IC piping you had to use?