Ram Air for Cooling Front Brakes and Rotors

Discussion in 'Chevy HHR Specific' started by CJ n Shagy, Oct 3, 2010.

  1. CJ n Shagy

    CJ n Shagy Full Access Member

    Posts:
    61
    Likes Received:
    0
    Joined:
    Jul 29, 2009
    Location:
    NW Dallas, TX
    passenger side done and i have more room because of no intake to go around or work around
    i used a 8 inch piece of pvc and that got me thruthe liner
    then used a 45 angle to go up the back wall. used the whole flex tube and this worked better
    drilled a hole in the edge of the liner at the top right
    then ran the tube all the way to the rotor
    the hose is literally 2 inches from it

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  2. Intmd83r

    Intmd83r Full Access Member

    Age:
    37
    Posts:
    459
    Likes Received:
    0
    Joined:
    Sep 13, 2010
    Location:
    New Hampshire
    looks good . but in the top of the bottom pick it looks a little flat
     
  3. CJ n Shagy

    CJ n Shagy Full Access Member

    Posts:
    61
    Likes Received:
    0
    Joined:
    Jul 29, 2009
    Location:
    NW Dallas, TX
    I flattened it a little at the top to make sure there was some clearance in turning since i am lowered
     

Share This Page