? on cams?

[FASTL61]

Im hoping to get a rapid response.
What would happen if I were to install only the stage 1 exhaust cam?Im only asking this cause im 07 with the cam sensor on the intake cam.
Im justy looking for a nice rumble on idle and a lil performance gain out of this if any.Discuss

 

[06_ion2]

just do the stage 2 and have a shop take the cam sensor off and press it onto the new cam.

 

[FASTL61]

too much to have a machine shop do that.Plus if I were to do stage 2 i would want springs/ect.I just want to know how it would run with stage 1 exhaust cam and stock intake cam.

 

[06_ion2]

too much to have a machine shop do that.Plus if I were to do stage 2 i would want springs/ect.I just want to know how it would run with stage 1 exhaust cam and stock intake cam.

it should run just fine. some on failnet are running stage 2 with stock springs.
it would run but i dont see the point in doing it.

 

[B-Low187]

i agree i dont think its worth it to just use an exhaust cam and a stock intake cam.

 

[FASTL61]

Im just curious as to how it will run.

 

[06_ion2]

Im just curious as to how it will run.

it would run just fine im on stag1 intake stage 2 exhaust and it idles perfect! on a stock ss/sc tune

 

[FASTL61]

any lope at all on idle?

 

[06_ion2]

any lope at all on idle?

yes but its not much kinda sounds like a subi idling. definatly doesnt sound stock anymore

 

[FASTL61]

Ya.I just didnt wanna **** around with the cam sensor.With my luck shit will go out of wack.lol

 

[Cobalt Tom]

im running stg 2 cams and stock springs all the way to 7.2k rpm
runs just fine and compression is great still

 

[FASTL61]

Ya I was just saying about the cam sensor.I dont want to mess with it unless vince can delete it completely and have all timing on the crank sensor/I dunntherwise im not messing with it

 

[Cobalt Tom]

Ya I was just saying about the cam sensor.I dont want to mess with it unless vince can delete it completely and have all timing on the crank sensor/I dunntherwise im not messing with it

last i talked with him about it, he can remove the censor completely, its not really needed, ask him though!
i know he is on vaca now, but wont be forever

 

[FASTL61]

ya I wont have money till xmas time I think so well see.Maybe ill save up for cams then see if he can delete the sensor completely

 

[Cobalt Tom]

ya I wont have money till xmas time I think so well see.Maybe ill save up for cams then see if he can delete the sensor completely

there you go

im saving to have the head fully built