Skyline Taillight mod, putting lights in the inner taillights

[camopaint0707]

For those that don't want to do this mod themselves, I am going to offer doing this taillight mod for people. It's basically installing LED's in the red inner taillights where the reverse lights are since no lights come there stock. How I will do this is I will use a dremel to cut the red front from the back part and I install LED's around the red ring and then run the wire through the front. I will then place the pieces back to together and seal them together using epoxy/glue. Core charge now available. Also this mod is now offered for both the inner and outer taillights. Same pattern will be on both lights. Prices are as follows.
Inner taillight mod only-$120 with $60 core charge refund-total you pay is $60
Outer taillight mod only-$120 with $50 core charge refund-total you pay is $70
Both sets of lights modded-$200 with $80 core charge refund-total you pay is $120 (save $10) Thanks!! email me at [email protected]

 

[Jn2]

looks good, i did it a bit different, i put 3157 red LED bulbs in the inner tailights...came out nice, once i blacked out the tails, the red shade matches the outer lights.

 

[dman090]

i think they are too bright

 

[dman090]

the only way i can think of with these lights are put about 2 or 3 extra coats of night shades on hte inners lol

 

[dman090]

I have about 5 coats on mine.

same here

 

[BlackCobalt707]

ima have to take you up on this offer one of these days

 

[ff_drift_lol]

i want to do this just not with led's.

 

[camopaint0707]

drift not sure how you'd get a light in there that isn't LEDs,
I am in the process of doing this to the outer tailights but I don't have anything finished. I don't have any closer pics of the taillights right now. But you could probably go to my photobucket and see the pic blown up. Personally I don't think the lights are that much brighter than my LED taillights in the pic.

 

[mrsilent13]

a video of them in action...if you can make them sequential....im all over it

 

[camopaint0707]

What is there to make sequential?
this is the best I can do since I don't have my cobalt with me
http://www.youtube.com/watch?v=Ca-a7ccZDug

 

[camopaint0707]

bump, core service return now available

 

[camopaint0707]

bump

 

[They call me godly]

Might hit you up about this soon, just saying haha

 

[camopaint0707]

Ok just let me know.

 

[camopaint0707]

bump. anyone interested?

 

[mrsilent13]

can you do something like this for the cobalt tail lights
C5 & C6 Corvette Sequential Turn Signals....NEW!! 97-10 : eBay Motors (item 110490786502 end time Apr-06-10 16:43:36 PDT)

 

[camopaint0707]

No I don't have the circuit boards and relays to make the lights sequential.
But the offer is still for sale!

 

[mrsilent13]

do you know what would be needed to make something like that....send me a pm and im sure i can wire it up