cams on 07+

[huckernage]

I m looking for a thread that speak about install a cam sensor on a cam stg X.

is anyone has a stgX cam on L61 07+

 

[cobalt123]

hang on i thought cobalt tom had a how to up on this

---------- Post added at 04:03 PM ---------- Previous post was at 04:02 PM ----------

http://www.chevycobaltforum.com/forum/showthread.php?t=251&highlight=install+cams

 

[dman090]

hang on i thought cobalt tom had a how to up on this

---------- Post added at 04:03 PM ---------- Previous post was at 04:02 PM ----------

http://www.chevycobaltforum.com/forum/showthread.php?t=251&highlight=install+cams

nah man one of the cams is too long for the 07+ 2.2's or something like that an d you need a sensor machined in

 

[FASTL61]

the intake cam has to be cut then the sensor doesnt need to be there,vince can tune out the sensor but you can get it machined on

 

[huckernage]

vince has tuned one. but i told me that he has cam sensor correlation trouble. he didnt tell me that fastl61. i ll confirm that with him.

 

[mrsilent13]

what u need to do is purchase some stage x cams that fit for ecotecs....comp cams right..

now you will take your stock intake cam out and take it to a machine shop and tell them to swap the sensor from your stock cam onto your new stage x intake cam....

i had some stage 2 cams for the 07 head...i had the only ones ever made...i sold them about a year ago....dont know who has them now

 

[huckernage]

mrsilent: is your setup was running fine or you get hard time with it

is it you : this car had a persistent P0016 code (cam/crank sensor correlation)

---------- Post added at 05:44 PM ---------- Previous post was at 05:29 PM ----------

the intake cam has to be cut then the sensor doesnt need to be there,vince can tune out the sensor but you can get it machined on

TFT dit (17:05) :
i am not totally sure about this
there was one 2007 2.2 we did stage cams on

 

[mrsilent13]

just get the sensor machined on...and this way you wont have any kind of problem with sensor correlation.

 

[huckernage]

just get the sensor machined on...and this way you wont have any kind of problem with sensor correlation.

same if the sensor is maniched on. i can be off by a hair and send a DTC.

were you runing that sensor on?

 

[mrsilent13]

yes...the sensor was on...but like i said i sold the cams about a year ago...i had them for sell for about 4 months and they finally sold to White G5 on G5club.net if you like...you can ask him if he still has them or maybe he knows who has them. but these cams were done by bates engineering

 

[Cobalt Tom]

yes...the sensor was on...but like i said i sold the cams about a year ago...i had them for sell for about 4 months and they finally sold to White G5 on G5club.net if you like...you can ask him if he still has them or maybe he knows who has them. but these cams were done by bates engineering

bought to say, they got transfered around a bit lol

 

[huckernage]

''if'' vince was able to tuned that WO this sensor.

why do I ve to cut it? 2.2 head are different from 06 and 07.
-i can understand that you have a sensor there. but WO this sensor, is the cam can bolt on there WO issue

do you ve a pic of your head at that time?

thx Mrsilent for these precision

 

[ff_drift_lol]

I thought the LSJ and LNF only had an issue with the cam position sensor? I may be wrong.

 

[sfwg]

no the 07's have a whole hand full of **** that the lnf lsjs have its really annoying

 

[mrsilent13]

ill go take a picture in a bit so you can see the difference...ill post it up asap

---------- Post added at 05:36 PM ---------- Previous post was at 05:20 PM ----------

05-06 head with intake cam

07+ head installed on my 05 cobalt

CMP sensor not being used in my 05...not part of the harness

 

[sfwg]

so does that mean i can put a 05-06 head on my 07?

 

[mrsilent13]

yes they fit perfectly...the only issue you would have is that you would need to turn the CMP sensor off through some tuning aka trifecta or ls2edit...and then you can run an 05-06 head with no problems...