Cobalt Tom
Platinum Member
ill have to check the threads, but i thought it was a 14.5 or something...
fastest n/a 2.2
- Thread starter siccracingturtle
- Start date
camopaint0707
Full Access Member
i wish someone made cams for the 2007 cobalts
dunit121
Full Access Member
so u think ur fast case ur car has traction?
Cobalt Tom
Platinum Member
you can use the same cam, you just have to have vince tune out the cam position sensor...
camopaint0707
Full Access Member
the comp cams are a different size, they are too big
Cobalt Tom
Platinum Member
to big as in? like the part that bolts in? to long? to big lobes?
camopaint0707
Full Access Member
too long
Cobalt Tom
Platinum Member
hmm...that is odd...
the intake one is too long?
sloancallaway
Full Access Member
im pretty sure i have the fastest redline on the site lpl
Cobalt Tom
Platinum Member
ic ic
you guys dont use that 11th cam cap at the end of the intake cam
you guys dont use that 11th cam cap at the end of the intake cam
camopaint0707
Full Access Member
not sure which one, cause one of them did fit but the other didn't
elecblue06
Full Access Member
thats from the 1/4 mile thread on css.. and that crack on his windshield and lack of doors.. it's definitely his car lol
Cobalt Tom
Platinum Member
your right, i hadnt caught the update here for the thread, i need to add that, he posted i just didnt see it...and i dont check that on fail.net anymore
---------- Post added at 09:27 AM ---------- Previous post was at 09:27 AM ----------
do you know if that is with the new cam installed or not?
cobalt123
Platinum Member
good info in here. nice jobs on the 2.2s
stenguyen1
Full Access Member
i got the fastest na cobalt lol jk hahaha
elecblue06
Full Access Member
your right, i hadnt caught the update here for the thread, i need to add that, he posted i just didnt see it...and i dont check that on fail.net anymore
---------- Post added at 09:27 AM ---------- Previous post was at 09:27 AM ----------
do you know if that is with the new cam installed or not?
no cams he posted the times like 5 days before the cams or so i think just bolt ons.. cams would give more then .2 seconds i'd think
siccracingturtle
Full Access Member
- Joined
- Sep 25, 2009
- Posts
- 266
- Reaction score
- 0
u can make the cams work just gotta have a machione shop cut a lil off but no biggie.. huckernage has some sweet 60's. drag radials ?
SportLt
Full Access Member
im still the fastest one, no matter what your numbers say
Cobalt Tom
Platinum Member
ya, he has driver mod like no other
---------- Post added at 03:06 PM ---------- Previous post was at 03:06 PM ----------
wasnt sure. cause he posted those times here 5 days ago, which means today would have been cams...
huckernage
Full Access Member
thx for all good comments
my 14,25 is done WO my cams
that day was the best for traction. you can see by my speed 94mph and 60', never done that before.
nitto are good at 12 psi and cold. I mean they get slower if you do like 12 pass Wo stop. these slips were done in my 5 first runs.
I m the quickest but not the fastest. Tom has a faster trap speed.
top 5 mods : nitto, WR, trifecta, fidanza, exhaust
my 14,25 is done WO my cams
that day was the best for traction. you can see by my speed 94mph and 60', never done that before.
nitto are good at 12 psi and cold. I mean they get slower if you do like 12 pass Wo stop. these slips were done in my 5 first runs.
I m the quickest but not the fastest. Tom has a faster trap speed.
top 5 mods : nitto, WR, trifecta, fidanza, exhaust