fastest n/a 2.2

[siccracingturtle]

Amazing, I got tuned with all that stuff I posted up, moved my limiter to 7.5k and killed the speed limiter. the PE delay is gone so its quick

wat do u top out at with the speed limiter removed ?

 

[YelloEye]

120 in the weather around here, if I could get back to WA where it was tuned I could probably do better. Havnt tried to push it farther than that cause it takes a while to get that high.

 

[siccracingturtle]

120 in the weather around here, if I could get back to WA where it was tuned I could probably do better. Havnt tried to push it farther than that cause it takes a while to get that high.

how much did u pasy for ur tune and how long did it take for vince to do it ?

 

[YelloEye]

I dont remember exactly something like 300 I think. Only took like half an hour while I was up there

 

[siccracingturtle]

I dont remember exactly something like 300 I think. Only took like half an hour while I was up there

yea i might have to get the tune next week lol.. either that or ima save up folr another mk3 supra

 

[huckernage]

a tune on a NA is around 3 custom tune and you should ready to race

---------- Post added at 09:19 AM ---------- Previous post was at 08:54 AM ----------

Amazing, I got tuned with all that stuff I posted up, moved my limiter to 7.5k and killed the speed limiter. the PE delay is gone so its quick

---------- Post added at 09:26 PM ---------- Previous post was at 09:24 PM ----------

I run 10.1 in the 1/8th havnt hit a quarter track yet. closest one is an hour away.

10.1= 15,7 on 1/4

my data :

15,568 88,24 10,024 70,68

 

[camopaint0707]

here is my dyno sheet

mods
mrz alt. pulley
z spec crank pulley
injen cai
2.25 exhaust
racing solutions header/dp
2.4 manifold
port and polish 2.4 tb
tune

 

[huckernage]

wow 5 hp less that tom and his has stg 2 cam.

about your TQ we just see hp

have you done some pass on 1/4?
if yes what were your time?

 

[YelloEye]

Damn camo, nice numbers for just those mods....I need to get dynotuned

 

[Cobalt Tom]

wow 5 hp less that tom and his has stg 2 cam.

about your TQ we just see hp

have you done some pass on 1/4?
if yes what were your time?

try about 25 less....
i dynod when my afr was at an 11ish and hsould have been 14.5 which would DRASTICALLY change the hp rating
vinces and dyno owners est put it at ~200

 

[huckernage]

can wait to see a dyno sheet from it

is it expensive to run a dyno ever there

 

[siccracingturtle]

got my mani on ! no major notice but pulled nice wen i hit 4500 rpm... but i must say 2.4 mani+75 shot= SEX... and not just regular ol' sex im talking bout a threesome with twins

 

[Cobalt Tom]

can wait to see a dyno sheet from it

is it expensive to run a dyno ever there

it is decently expensive yes, and i dont have one of after the retune because it was a retune on the road, all my tuning for this setup was on the road. next round of tuning after engine overhaul will be on the dyno with sheets

 

[camopaint0707]

wow 5 hp less that tom and his has stg 2 cam.

about your TQ we just see hp

have you done some pass on 1/4?
if yes what were your time?

doesn't he have a shaved head and new injectors as well?

 

[SportLt]

i put a quart of "hopes and dreams" in my tank, now i run a 5.19 @ 176 mph.

 

[Cobalt Tom]

i put a quart of "hopes and dreams" in my tank, now i run a 5.19 @ 176 mph.

sweet deal! wanna send some my way? i have an old 77 f150 that could use some of that hahaha

 

[camopaint0707]

i was gonna say cobalt tom, i thought you broke 200 or were at least really close to it, I have the tq sheet here somewhere, and I really don't think 176 sounds outrageous, I think its right where it should be with all those mods and a decent tune

 

[Cobalt Tom]

i was gonna say cobalt tom, i thought you broke 200 or were at least really close to it, I have the tq sheet here somewhere, and I really don't think 176 sounds outrageous, I think its right where it should be with all those mods and a decent tune

agreed, yours is spot on, mine was way low due to the afr, so ya, 176 sounds right

 

[camopaint0707]

thank you, now I can tell all the haters to go suck it haha, do you know how B-low187 is going with his fully built NA motor?

 

[Cobalt Tom]

thank you, now I can tell all the haters to go suck it haha, do you know how B-low187 is going with his fully built NA motor?

he hasnt started yet as far as i know
he just wants one
ill have one next spring

it is nice to be able to tell all the boosted h8ters that you can make a few ponies on an n/a engine eh?